Wooden Camera Unified Baseplate (Sony FX9, FS7, FS7mkII; Canon C100mkII, C300mkII, C100, C300, C500) is a quick-release baseplate that provides a lightweight 15mm rod support at the correct lens height. 15mm rods run from front to back and feature two locking thumbscrews per side. The quick-release levers on the baseplate allow the user to take or leave behind the lightweight 15mm rods.
To remove the camera and leave behind the 15mm LW rods, loosen the right thumbscrew, slide the camera back a bit, and lift straight up. The dovetail on the bottom of the camera is an ARCA Swiss standard shape that integrates with many third-party products. Additionally, there are 1/4"-20 threaded holes on the bottom for mounting on gimbals or tripod plates if needed. At the top dovetail, there is also a vertical 15mm rod opening allowing for lens adapter foot support directly in front of the camera body. An example of this is the Sony FS7 using a Metabones Canon EF adapter. The top dovetail would be positioned to have the vertical 15mm rod pointing forward, and the Unified Lens Adapter Support Kit would be installed and threaded into the Metabones support foot.
The bottom of the baseplate features the lower quick dovetail with 1/4"-20 and 3/8"-16 threaded holes for mounting on tripod plates or ARRI standard bridge plates like Unified Bridgeplate (19mm) or Unified Bridgeplate (15mm Studio). To remove the camera from the included lower quick dovetail and take the lightweight 15mm rods, loosen the left thumbscrew, slide the baseplate back a bit, and lift up. This action exposes an integrated ARRI dovetail slot on the bottom that can directly attach to any 2060 dovetails, safety dovetails, or shoulder pads.
For VCT-14 compatible mounting options, the Unified Baseplate can be attached to the Unified VCT Wedge Plate to provide easy counterbalance on the shoulder. This can then be attached to the Unified VCT-14 Tripod Plate mounted on the tripod head.
Features:
- Quick-release baseplate providing lightweight 15mm rod support at the correct lens height
- 15mm rods run from front to back and feature two locking thumbscrews per side
- Two types of quick-release levers allow the user to take or leave behind the lightweight 15mm rods
- To remove the camera and leave behind the 15mm LW rods, loosen the right thumbscrew, slide the camera back a bit, and lift straight up
- ARCA Swiss standard shape on the bottom of the camera integrates with many third-party products
- The plate features 1/4"-20 threaded holes on the bottom for mounting on gimbals or tripod plates if needed
- There is a vertical 15mm rod opening allowing for lens adapter foot support directly in front of the camera body
Specifications:
- Weight: 362.8g / 0.8 lbs
- Dimensions: 50.8 x 152.4 x 152.4 mm / 2 x 6 x 6"
Included:
- 2 x 1/4"-20 Flathead Screw
- 2 x 3/8"-16 Flathead Screw
All information provided without guarantee. Please also refer to the current and detailed manufacturer's information.
